Steel Kodiak

Deck Capacity:

20,000 lbs.

Deck Lengths:
20', 22', 24'
26', 28', 30'

Deck Width:

96"

DANCO STEEL KODIAK SPECIFICATIONS

Model	Deck Length	Deck Width Outside	Load Rating (Water Level Load)	Cab To Axle	Cab To Tandem With Stabilizer	Cab To Tandem Air Suspension and Stabilizer	Cab To Tandem Without Stabilizer
2010T	20'	96"	20,000 Lbs.	120 - 126 Inches	Not Available	Not Available	Not Available
2210T	22'	96"	20,000 Lbs.	144 - 150 Inches	114 - 120 Inches	120 - 126 Inches	120 - 132 Inches
2410T	24'	96"	20,000 Lbs.	168 - 174 Inches	138 - 144 Inches	144 - 150 Inches	144 - 156 Inches
2610T	26'	96"	20,000 Lbs.	192 - 198 Inches	162 - 168 Inches	168 - 174 Inches	168 - 180 Inches
2810T	28'	96"	20,000 Lbs.	216 - 222 Inches	186 - 192 Inches	192 - 198 Inches	192 - 204 Inches
3010T	30'	96"	20,000 Lbs.	Not Available	210 - 216 Inches	216 - 222 Inches	216 - 228 Inches

STANDARD FEATURES

Deck

	3/16 Inch Steel Diamond Plate Deck
	2 Inch Square Tubing on 10 Inch Centers
	Tie Down Key Slots (4 Front, 4 Rear)
	Driver and Passenger - Chain Trays
	Stake Pockets Full Length
	Heavy Duty Tapered Approach Plate
	Steel Bolt-On Cab Protector
	Standard Paint Color: (Grey or Black)
	12,000 Pound Worm Drive Winch
	50 Feet of 1/2 Inch Winch Cable
	Bed Anti-Tilt Feature

Subframe

10 Ton Rigid Reinforced Tubular Subframe

Driver and Passenger Side Illuminated Controls

Lubricated Control Handles

Replaceable High Performance Slide Pads

(2) Danco Mud Flaps

Electrical

Federal Standard 108 Lighting

Weather Resistant Electrical System

Back-Up Lights

Interstate Commerce Commission Lights

Back-Up Alarm

Hydraulics

	Hydraulic Oil Reservoir
	Oil Filter with Cartridge
	Hydraulic Pump
	Aeroquip Abrasion Resistant Hydraulic Hose
	Flexible Hose and Wire Tracking System
	Extra Length Push-Off Cylinder
	Two Power Lift Cylinders
	Chrome Plated Cylinder Rods

General

Dual Adjustable Positive Hold Downs

Lubrication Fittings on All Pivot Points

All Components for Complete Installation

Pre-Assembled and Factory Tested

Optional 5/4" Apitong Wood Deck	Heavy Duty Subframe Mount Stabilizer

MOST POPULAR OPTIONAL EQUIPMENT

	Two Gear Power Take-Off w/ Warning Light
	Air Shift PTO
	5/4 Inch Apitong Wood Deck
	Flat Bar on Side Rail with Stake Pockets
	102 Inch Wide Deck
	Paint Other Than Standard
	Non-Skid Deck Applicant
	Split Removable Deck Rails
	Additional Tie Down Key Slots
	Heavy Duty Industrial Cab Protector
	Screen In Cab Protector
	Enclosed Cab Protector at Bottom
	3/16 Inch Steel Diamond Plate Over Wood
	3/16 Inch Smooth Steel Over Wood
	1/4 Inch Steel Decking
	8 Inch Deep Wheel Wells and Covers
	Dual Propane Tank Holders with Chain Rack
	Folding Deck Ladder

	Forklift Guard (Heavy Duty Bumper)
	D - Rings
	Frame Mounted Cab Protector (Requires 6" Additional CA.)
	Marker Light Package In Cab Protector
	LED Lighting
	20,000 Pound Worm Gear Winch
	Spring Loaded Cable Tensioner Plate
	Cable Roller Guide
	Hand Held Wireless Remote Control for Winch
	48 Inch Tool Box with Locking Latch
	Tunnel Tool Box
	Subframe Mount Hydraulic Stabilizer Bar
	Wheel Lift / Tow Bar / Hitch Receivers / Hitches
	Self Etching Primer (Subframe)
	Wrecker Special Light Bar w/ Three Inch Risers
	Work Light Package
	Factory Installation

Many Other Popular DANCO Accessories Upon Request

Gross vehicle weight rating limitation must be considered. Ratings are based on structural factors only,
not chassis capacity. Danco specifications shown are approximations and may vary depending on chassis
selected. Danco's body ratings are based on a water level capacity. Product specifications are subject to
change without notice. Some optional equipment may be shown in photographs.
"Excellence In Ease And Efficiency"